Holosun 4/507k RMR adapter for brownells glock slide
Description
Trijicon RMR to Holosun 407k / 507k adapter plate for Brownells Glock 17/19 RMR cut slide or MOS Version 2 Will require the slide posts to be shaved down about 1.5mm or so, you will also need to grind away some material from the 3mm nut and bolt m3 bolt total length is 9.45 m3 nut total length is 1.7mm after shaving material away have not used v2 as I am not wiling to modify my slide just yet Version 5 Will require just a very light sanding on the bolts as well as the front and back of the adapter for a tight friction fit unmodified screw length is 11.9mm both are designed to be printed with resin .1 layer heights work fine - I was able to crack v5 by racking it pretty hard on the table, held up very well for a resin print though *UPDATE* -standard resin isn't gonna cut it, put a mag through it and it shattered in almost the same exact way. I've printed it now in polymax pc at a .15 adaptive layer height with a .2mm nozzle and 30% infill, the original design will work for fdm so long as you deburr the edges on the bottom and the mounting holes
Statistics
Likes
3
Downloads
0