Spool Desiccant Box - Hygrometer
Description
I loved the desiccant spool boxes, but had several issues getting the hygrometer out again (for batterie change). So i decided to design something own. I have been inspired by the two designs linked here (remixed from). Benefits of my version: - No lid at all, so no screw to print. Just mount the hygrometer (the normal round one you can buy in bulk from amazon) and turn it. It will automatically be fixed. - Easy battery change. Just move it back to the small opennings and pull it out. No tools needed (you can slightly grip the hygrometer on its rand). - No Supports needed and easy to print. With default 0.45mm settings, you will have a wall with two lines, almost no gap fill (3 minutes, see last picture) with a print time of about 2:57 hours with 15% infill. - Holes are 1.6mm so you should be able to fill in every desiccant. There are two versions now. 53mm will fit very well for Filamentum spools. The 50mm will fit all with a gap depending on spool brand. Step file of the 53mm spool is provided for remixes, if you want to. I am not happy at all with the design, as i have a lot of different spool brand, everyone seems to need a custom length or width. So you cant use this for Filamentum and for Prusament, as the Prusament spool is quiet hollow in the mid. Still thinking how to built something, which might fit all. So far, i like this version without a lid and how i can remove the hygrometet just with turning it. Happy printing!
Statistics
Likes
2
Downloads
0