EVA mount for OmniaDrop
Description
UPDATE 2021-10-28 Added three files for the V2.1 OmniaDrop. EVA plain bottom, New belt grabber V4 and RR V2.1 front V4. These allow the Ezabl to mount on the front left. https://www.youtube.com/watch?v=yeOU2jdAS0g&t=5s&ab_channel=DavidWilson ___________________________________________________________________ I wanted to use an OmniaDrop on my Rat Rig V-core build, and could not find a mount for it. After a lot of experimentation, I came up with this. It is a mod of the Hemera mount, and will work with a mirrored OmniaDrop with the Hemera mount option. It should work with the V1.4 or the new V2.1. I have the new version on order and will test when I get it. The bottom allows for an Ezabl to be mounted behind the OmniaDrop. The top has a mount for an ADXL345. I modified all pieces to use heat set inserts (3mm) instead of the captured nuts. This makes it much easier to assemble and stronger. I replaced the 4 - M3x 35 mm screws that hold the front and back together with M3x40mm. That may not be needed, but made it much easier to assemble. The stock OmniaDrop fans and mounts are used. Here it is printing https://www.youtube.com/watch?v=iFro5fX39Nk&ab_channel=DavidWilson
Statistics
Likes
0
Downloads
0