Parametrizeable Generic Mast with GU4 LED Light Holder [Light Stand, Desk Lamp, Case Illumination]

Description

The Mast ========= This is a fully parametrizeable 3D printable mast with a LED light holder on top. Its has a triangular base and rounded corners. You can set the overall height of your mast as well as the number of sub-parts it shall be split into. You can set the length of a triangle side and the width of the beams. It comes with dowel joints so you can stack them on top of each other: <a title="SilentC, CC BY-SA 3.0 <http://creativecommons.org/licenses/by-sa/3.0/>, via Wikimedia Commons" href="https://commons.wikimedia.org/wiki/File:Woodworking-joint-butt-dowel.gif"><img width="300" alt="Woodworking-joint-butt-dowel" src="https://upload.wikimedia.org/wikipedia/commons/e/e9/Woodworking-joint-butt-dowel.gif"></a> Snapmaker 2.0 adaption ------------------------------ The mast is designed to illuminate my snapmaker 2.0 casing. So it has holes in the bottom beams which fit the original screw holes of the control screen holder. Apart from that this item is completely generic. The Light Holder ============= The light holder has spaces for a GU4 socket LED lights plate. You can set the width of the light plate as a parameter. For a 28mm plate i recommend to set this to 32mm in order to confortably insert the plate. Example: > LED Lampen mit G4/GU4 Stiftsockel 9 SMD (5050) AC/DC 12-30v Warmweiss > See https://www.amazon.de/dp/B00KXFM0QO/ref=cm_sw_em_r_mt_dp_MGKVBKE968HCZXA1EPPN

Statistics

Category

Tags