roller_y-carriage
Description
Let's see how long it takes this time until this idea comes up with Ali! Roller slide You need 6 pieces of V-rollers, 6 pieces flat head screw M5x20 (for the one-piece), 12 pieces flat head screw M5x20 (for the multi-part), possibly new level adjusters and a GT2 belt (930mm long). For types 2 and 3 you need a spindle shaft and a flat one Anti-back slash nut. (see pictures) One-piece sledges are also listed for people who have a large heatbed, or dare to print on the 300mm bed (no skirt) You need part 123 for all three structures, part 1 for structure type 1, part 2 for type 2 and part 3 for type 3. Type 1: original round rod guide, belt drive and pulley. Round rod guide can remain mounted on one side, it will the slider slid open and the belt moved. Belt length for the Anet E12 930mm. 2 X slider_wing 1 x belt_coupling Type 2: original round rod guide. Round rod guide can remain mounted on one side, the slider is pushed and the spindle drive mounted. Reset steps !! 2 X slider_wing 1 x spindle_coupling 1 x motor_mount 1 x spindle_guide_front 1 x cover_spindle_guide_front Type 3: Complete renovation. Round rod guide in the new bearings, insert on one side, slide on the slider, mount the spindle drive and mount it as a complete guide element. Reset steps! 2 X slider_wing 1 x spindle_coupling 1 x motor_mount_complete 1 x spindle_guide_front_complete 1 x cover_spindle_guide_front One-piece sledges are also listed for people who have a large heatbed, or dare to print on the 300mm bed (no skirt).
Statistics
Likes
2
Downloads
0