CR-6 SE (MAX) / CR10 Smart - belt tensioner Z-axis synchronizer
Description
**Hardware needed per tensioner** 1 x Ball Bearings 608 (8 mm x 22 mm x 7 mm) 1 x M3 x 10 1 x M3 T-nut (alternativ : [3d printed part](https://www.thingiverse.com/thing:3050607) ) 1 x M4 x 16 1 x M4 nut **Installation** Slide the tensioner from the center of the extrusion profil to the right (or left) to adjust the tension. You can choose to place 1 or 2 tensioners depending on how much the belt needs to be tensioned. *WARNING - if you don't use the stock extruder A tensioner placed on the far left side could interfere with the extruder footprint. I recommend to adjust your slicer profil and/or your firmware to reduce the build volume on the Z-axis accordingly.*
Statistics
Likes
55
Downloads
0