Smartphone Holder, Videostand
Description
This was just a quick and dirty project, i had take some closer photos with my smartphone and I needed a stand. So this is just the holder you can fix on a tube with 20mm or less diameter. I used my Proxxon Machine Stand. Parts you need: 4x M3x20mm Countersunk Screw 6x M3 Nut, 2 of them are insert in the 2 slots. 2x M3 Screw 1x M4x45 Screw and a M4 Nut, or I take 2x M4 Nut an cut a M4 threaded bar.
Statistics
Likes
0
Downloads
0