Zinc Plunger Core
Description
3d printable version of the Zinc CNC Plunger Core Rod should be printed laying flat will supports and brim Screw should be printed upright without supports. After printing, insert the Rod into the screw and use CA Glue to secure. Rod may need mild sanding beforehand. There are 5 screw versions depending on your printer tolerances, start with the normal version and work your way up or down, however it should screw into the 118design plunger with mild resistance and not too loose otherwise it may unscrew after repeated firing All prints should be at 100% infill Should fit both Zinc 2.0 and 1.0 Blasters Zinc Foam blaster is designed by 118design https://118.design/
Statistics
Likes
4
Downloads
0