Pistol Crossbow Legolini Bolt with Steel Tip (The Easy Way)
Description
This is a PISTOL CROSSBOW/SLIDING LEGOLINI BOLT with a modified steel tip of a pistol crossbow bolt by Phytonp90. With a length of 161mm and a diameter of 6.3mm it is very suitable for use in sliding legolini and is a cheap solution. The differences with the original version is that it is heavier at the tip, more resistant to wind and more resistant to impact as well as being able to penetrate previously impenetrable materials such as plastic, cloth, some leather, etc. Use M3x50mm bolts, insert them into the crossbow bolt (hole depth is 45mm, no glue needed), cut the remaining bolts diagonally so that the ends are sharp and still maintain the overall length of the crossbow bolt, don't cut too long or too short.
Statistics
Likes
3
Downloads
0