3D Printer 24volt Light Bar
Description
This is a light bar I made for my "Ender 3 Max" but should work on any printer. This setup uses two automotive style utility lights that will run on 12volt or 24volt DC, so the is no need for a buck converter. There are currently two versions: ========================= Heavy Duty Version - This versions has a 2mm (0.078in) wall thickness and is much stronger but takes a long time to print. Standard version - This version has a 1mm (0.039in) wall thickness but sacrifices strength for a reasonable print time. Things You Will Need: ================= + 2x - M4 T-Slot Nut by "daGHIZmo" can be easily printed to allow the light bar to be mounted to the printers frame. https://www.thingiverse.com/thing:1061769 + 2x - Peterson Manufacturing V388C White LED Interior/Exterior Dome, Utility & Accent Light. These can be found on "Amazon" but are a bit pricey, I got mine from "Fleet Farm". * https://www.amazon.com/Peterson-V388C-Blue-Auxiliary-Light/dp/B003HFYZTM * https://www.fleetfarm.com/detail/peterson-great-white-led-interior-exterior-dome-utility-accent-light-v388c/0000000080264?Ntt=led%20utility%20lights + 2x - 4mm Button Head Screws and 4mm Nuts + Electrical connectors + Wire Pleas Shear You Makes... THANK YOU ==============================
Statistics
Likes
1
Downloads
0