Dye DSR+ Feedneck Lever Thumb Screw
Description
A simple thumb screw to use for the feedneck lever on the Dye DSR+ paintball marker. Use with a 1" or 1-1/8" long #8-32 machine screw (preferably with a hex button head, so you can still use your allen key) and a hex nut. Tighten the nut on all the way at the head, then feed through the 3D printed part and attach to your feedneck lever. The 1" screw length should work for all loader feedneck sizes and allow you to operate the lever. 1-1/8" might be a little better if you need it looser, but are not standard in this size/style so expensive or hard to find. 1-1/4" is too long to use the lever. Unfortunately the screw that comes with the marker is 3/4" so will not work.
Statistics
Likes
2
Downloads
0