Skr 1.4 Slim Case
Description
A case for the Big Tree Tech Skr 1.4. i tried to make it the slimmest and smallest case possible. the lid locks with the case by an M3 screw at least 24 mm and 4x 5 mm wide and 2 mm depth magnets but honestly they are an overkill just the M3 screw gives enough resistance to close it shut. also 2x 40mm fans on the lid but again overkill.. i use both fans at 50% to get a nice quiet flow. 4x M3 Screws on the bottom of the case that go beyond it to use as legs or to lock on a frame. printable legs are attached. No Supports Needed. there is a version for the WiFi Module and without.
Statistics
Likes
0
Downloads
0