Radio for Twizy
Description
This is a case for a cheap radio that can be purchased in the internet for around 8 EUR. For me no additional amplifier was needed (version 2x 25W with 20 W speakers each work well). The case can be mounted on the left side as shown in the pictures. The cables are not visible if installed in the right way. 3 holes are necessary to drill (2x 3 mm for the screws and one 8 mm for the cables). The mounting process is a little bit tricky (you need small hands) but possible. The case is 2 mm too short, so the sealing part is needed which is best printed out of TPU. The damper is printed with TPU, too.
Statistics
Likes
1
Downloads
0