Barilla Spice Shaker - Screw Lid
Description
I took the awesome design of guppyk and modified the cap to fit a small Pesto jar. The outer lid diameter is about 55mm and fits the glass, which has a diameter of 48.8mm and an outer thread diameter of 51.9mm with a coarse pitch of 16mm. " PRINTING Printing is super easy. Print at 0.2+ resolution and with 30%+ infill. No supports or build plate adhesion needed. ASSEMBLY You will need a single M3 screw (8+ mm) and nut. Place part B (the disk) on top of Part A (the screw cap) and insert Part C (the little disk, which serves as a "bearing") and connect all this with your M3 screw/nut. " (copied from guppyk)
Statistics
Likes
6
Downloads
0