LiftPod configurable phone holder
Description
I found that I was having trouble with printing the long screw for the LiftPod phone holder - it just wouldn't fit the nut. I had some metal M5x25 screws and nuts, but they are too short So my solution was to make "Clamp B" longer so that an M5x25 screw would work Included is an STL with the Clamp B extended by 25mm, but I also include a Fusion360 project so that you can make one as long as you need. YOU DO NOT NEED TO KNOW HOW TO USE FUSION360! All you need to do is edit one value in one box and it will automatically resize the model to the size you want Simply download Fusion360 (It's free) Open the design ( https://a360.co/3FIFvBc ) Select Modify -> Change Parameters Set "ExtensionAmount" to the length you desire - the part will be made longer by the amount you type in the box Click OK to exit the parameters menu Right-click the model and Select "Save as Mesh" Select STL or 3MF Click OK Screen recording: https://i.imgur.com/9YB1bYn.gif
Statistics
Likes
0
Downloads
0