Led bar monitor
Description
# Led bar for monitor ### You must to choose one *stand* based on the thickness of your monitor *To create it you need:* - 8mm M3 bolt * 4 pieces - M3 nut * 4 pieces - M2 insert - 5mm M2 bolt ** Instead of all these you can use super glue, but then you won't be able to reopen it ** *You also need:* - Led strip 30cm - Matt plexiglass 17mm*300mm*1mm ## Post printing 1. After you've print all pieces you have to merge *left bar* and *right bar* with *joint*. 2. Now you will notice some tracks, the outermost is for the plexiglass, the second is for led strip and the upper gap will serve for the threads. 3. Once these items are in place you can close the bar with *closure*, as said before you can use *m2 insert* or *superglue* 4. Assemble the *stand* after routing the cables 5. In the holes of the stand you can put a counterweight, I've used *2 pieces of M6 * 45mm with their bolt* 6. **Connect to the power according to the voltage of your led bar and** ***enjoy!***
Statistics
Likes
6
Downloads
0