Radiator ventilator clip magnetic for 80mm fans
Description
With these simpel fan clips, I made my radiator fan from ten 80 mm fans connected in series with y-splitters (edge thickness of fan for clip is 4 mm). The fans are controlled by a temperature switch and a simple LED dimmer connected to a DC12V adapter (2A). In the clips exactly fit two magnets of 1cm diameter and 2mm thick. No glue needed. Required per fan: - 2x clip - 2x magnet 10x2mm Printing in .28 resolution is sufficient. Use ABS or other filament that is heat resistant.
Statistics
Likes
0
Downloads
0