Anycubic 4Max Pro BL Touch bracket
Description
This is a BL Touch module for the Anycubic 4Max Pro. To install this, you need to remove the extruder housing cover. Since the housing cover triggers the Y endstop, you need to print a replacement. I used this one, designed by becar: https://www.thingiverse.com/thing:3852345. Installation was very easy and reversible. This is my offset for the probe: #define NOZZLE_TO_PROBE_OFFSET { -41, -53, -2 } Please note: I use a v6 hotend that is shorter than the stock. If you're using stock, your z value will be different! Printing: Nothing special is required here. No supports necessary. I printed mine in ABS with 25% infill from memory. Any material at any infill > 20% will be fine.
Statistics
Likes
2
Downloads
0