Neje 40W Laser A40640 - air assist, low profile
Description
This is a Air assist for the Neje 40W Laser, replacing the plastic shield by one with a tube holder. Its very flat not to consume to much work area. Due to the possible heat I printed it from ASA, but maybe PETG or PLA will work as well. I used plastic tube 4x2,5mm. Its printable without supports. Update 21.10.2021 I did add V 2.0 with Air tube to prevent the Lens to get dirty, still very flat to save workspace..
Statistics
Likes
4
Downloads
0