Neje 40W Laser A40640 slider, adjustable, low profile
Description
This is a very flat, height adjustable holder rail for the Neje 40W Laser. Due to the possible heat I printed it from ASA, but maybe PETG or PLA will work as well. It add`s 4mm to the laser thickness only. Its printable without supports. at least 3 M3 inserts are needed. it can be fixed with 2 or 4 M3 screws on the Z-Axis, one M3 is needed to secure the Laser in the rail.
Statistics
Likes
2
Downloads
0