Rounded Base Tee Nut - M360 Universal Laser Cutter Lid Nut
Description
This is a rounded base tee nut with spanner wrench holes originally designed for the lid on Universal M360 laser cutter. I printed at 100% infill and .07mm layer height (.2 first layer) in PETG then threaded it with a tap. Parametric design in OpenSCAD can be used for other things that need a rounded tee nut, original dimensions fit the laser cutter lid with a #6-32 bolt (.107" pilot hole). The piece is a little marred up from holding in vise while I tapped it - oops.
Statistics
Likes
0
Downloads
0