Redone Ender3 Matrix+Lite Extruder Mounting Bracket
Description
Matrix Lite bracket for Ender 3/Pro. The one in the TriangleLabs google drive wasn't even adjusted for the Lite. TriangleLabs, if you see this, feel free to take it! Measure your own BLtouch coordinates. X should be negative and y should be positive (Cause it's back now ya'll). X=-10 Y=25 The stock bracket pushed the hotend nozzle ALL THE WAY to the right giving it a min_position of at least -40. This meant that the x carriage couldn't go all the way to the left and I lost at least 50 mm of bed space. CHANGES: 10-22-2021 The "Just holed" files are the ones that are tested and works with the current setup. You lose a little bit over 10 mm of bed space but at least it's closer to where the hotend is intended to be. Stock design with a hole moved for x-carriage on Ender 3 Pro on Part A and two holes added on Part B for better positioning with the Matrix-Lite. The "Full Bed" files are the ones that I included in which the mount should position the matrix lite to where the nozzle should be, finally freeing the entire bed for use. Works with the lite. Should probably work with the original. Print in strong filament. BLTouch screw holed for the inner screw so it should not interfere with it's long screws. Feel free to change what you don't like. I moved all the holes over 10 mm for full bed to nozzle action. I'll update with picture when I have time but this is completed and I'm done with this.
Statistics
Likes
7
Downloads
0