Durafly Tundra tail camera mount 14x14
Description
Camera mount for 14x14 camera to attach to the rudder. No gluing is required. Just one M3 14mm bolt or 12mm for tight squese. I designed this mount for [Caddix Ant](https://caddxfpv.com/products/caddx-ant-1200tvl-global-wdr-with-osd-2g-ultra-light-nano-fpv-camera) camera but you can use any 14x14mm camera with max 9mm lens. The camera gets hot when powered, so there are ventilation holes on the sides. In wet conditions, cover front holes with tape. Print upright, lens hole to the bed without supports.
Statistics
Likes
0
Downloads
0