Weber DGAS 38/38 32/36 Air Filter Adapter 3"
Description
Heres and airfilter adapter for Weber DGAS carburetors. its got a 15mm connection for crankcase ventilation and a oval connection for a soft 3" 76mm airduct hose. Airfilter gets mounted somewhere else and then a hose to this adapter. Its low profile at just 70mm high with big air volume. Note that its a big print and requires a 30x30x30cm printing surface and print in PETG, The 60mm distance pieces mount inside the housing to support the roof. Has to be printerd in standing position with large flat side facing down and 3" hose connection upwards, to hinder warpage use som base support also. About 600g of filament is used for printing. For mounting swap the original studs on the carburetor for longer threaded rod pieces. Some filing may be required when mounting!
Statistics
Likes
0
Downloads
0