Yuneec Q500 Typhoon Universal Battery Holder
Description
I Designed A Universal Battery Holder For The Yuneec Q500 Typhoon This Holder Will Allow For A Variety Of Regular 3S Lipo'S With Ec3 Connectors To Be Used Within This Drones Battery Compartment. The Following Are The Max Internal Battery Holder Dimensions: 126Mm Long X 44Mm Wide X 32Mm Tall 12.6Cm Long X 4.4Cm Wide X 3.2Cm Tall 4.96" Long X 1.73" Wide X 1.25" Tall Additional Parts Needed To Complete This 3D Print Are 2 #8 - 1/2 Screws To Attached The Ec3 Connector Mounting Clip Printed In Abs With Support And At 30% Infill And Total Weight Is Around 51 Grams With 2 #8 - 1/2 Screws (Without Any Batteries) Here Is A Video Showing The Universal Battery Holder In Action: Https://Www.Youtube.Com/Watch?V=9Gxdbkrcqz0 3-9-2015 Update: There Is A "Lite" Edition Available Now Which Features Some Vents For Weight Reduction Printed In Abs With Support And At 30% Infill And Total Weight Is Around 35 Grams With 2 #8 - 1/2 Screws (Without Any Batteries) The Ec3 Clip Is Available In A Single File In Case One Gets Lost So The Entire Holder Doesn'T Need To Be Printed Again.
Statistics
Likes
90
Downloads
0