Sprinter rear door upper stopper
Description
This Upper door stopper, when installed with the Lower door stopper you can also fine here, can limit the degree of opening of the sprinter's driver-side rear door. This is necessary when an Aluminess rear no-drill ladder is installed to the driver-side rear door with a 270 degree hinge. The stopper should help prevent the ladder from crushing the tail light assembly when the door opening is not limited. See how the stoppers are installed here: https://youtu.be/6UDVM56_CSw You should print this part with at least 80% filled to have enough strength. This stopper should be treated as last line of defense. Care should be taken to limit the door by either cable or keep it fully engaged against the stopper. Door swing by wind or when hill parked will crush this sacrificing piece and in turn may not be able to prevent the ladder from coming into contact with the car. This is a DIY piece. Use it at your own risk.
Statistics
Likes
0
Downloads
0