Screen stand for snapmaker 2.0 A350
Description
Screen stand for Snapmaker 2.0 A350, maybe also for other models. The stand is printed as two separate prints and then glued together. 0.2 mm print quality, I chose the fast one, it took about 5 hours to print on a prusa i3 mk3. The spacing of the holes is 32 mm, the diameters are about 4.8 mm (increased). The original stand, as in the picture, should be able to slide nicely, it can be screwed on later. The holes for the rubber bands are inverted cones, so you should change them to the ones available at home. Mine was about 18.2 mm.
Statistics
Likes
0
Downloads
0