Century Golem Gem and Card Insert Remixed - Sleeved Cards
Description
Fantastic remix from ShamusTheTinker that I really enjoyed. I took their design, and all I did was remove a little material from it so it prints faster and uses less material. Sleeved cards fit in this perfectly - I used Ultra Pro Tarot Sleeves *The changes I made:* 1) I cut 4 holes in the bottom of the gem insert. It's still stable and you can't see it 2) I removed completely a wall between the two coin holders. I believe this was for ease of getting insert out as it's not needed for separation, but I don't take the insert out anyway. It's quite snug 3) I removed most of the walls on the card side of the insert. After placing it in the box, I think I could have gotten away with removing the walls completely, but for the fact that having them there does allow the rules to lay nicely on top 4) They also used 20% infill, I used 10% and it worked great. Note however they used PETG while I used PLA. I know there is some risk with PLA melting but this is what I had. Credit goes to the two original creators of the design. All I did was modify slightly to increase print speed and reduce amount of material used.
Statistics
Likes
1
Downloads
0