Raspberry pi 4B desktop case with ups
Description
I am confused. The previous project has become private, so I can only repost it and give feedback with thingiverse (not yet responded). Please don’t believe it when commenting on any third profitable website, 90% are liars, please be careful Regarding the assembly video, although I really want to make a video, I don't know how to edit it, and I don't want to reassemble it again, I believe you too. ---------------------------------------------- This is a small case for Raspberry Pi, which supports UPS, cooling fan, memory card insertion and removal, and battery removal. The size is 92 \* 92 \* 60mm If you want to make this case, you need to prepare the following materials, of course I also gave a list of materials: | Non-printable parts | Quantity | Remark | | ------------------------------------ | -------- | ------------------------------------------------------------ | | Raspberry Pi 4B | 1 | Buy it yourself | | Raspberry Pi cooling tower | 1 | Used for Raspberry Pi heat dissipation, horizontal fan can effectively save space | | Raspberry Pi UPS PLUS | 1 | Don’t buy it wrong, buy this one under the Raspberry Pi | | 0.96 inch oled | 1 | Used to display | | M2.5mm nut | 4 | For top fixing | | M2 x 3mm hexagon socket screw | 4 | For 0.96 inch oled fixing | | M2.5 x 8mm hexagon socket screws | 12 | Used to fix the side screen \* 8 Used to fix the bottom acrylic \* 4 It can also be used to fix M2.5 \* 14 copper pillars \* 2 | | M2.5 x 6 + 6mm copper pillar | 4 | For the cooling tower of the Raspberry Pi, you can use the built-in screws | | M2.5 x 7 + 6mm copper pillar | 4 | For UPS for Raspberry Pi, you can use the built-in screws | | M2.5 x 14mm double pass copper post | 2 | M2.5 \* 14+4 copper pillars can be used instead. Considering that there are fewer copper pillars, double-pass copper pillars are recommended | | M2.5 x 20mm double pass copper post | 2 | The UPS is fixed at the bottom, which can be replaced by M2.5 \* 20+6. Double-tube copper columns are recommended for easy installation | | M3 x 10mm hexagon socket screw | 4 | Used to fix the cooling fan on the top | Among them, it is recommended to use acrylic(3mm) for the side and bottom plates, which will look good. I also provided the dwg file for acrylic cutting. Then the side panel will be very monotonous because of the blank, you can engrave some patterns on it, just like me. I will post a video later
Statistics
Likes
769
Downloads
0