SMD solder paste dispenser
Description
Inspired from the JBC solder paste dispenser i created this "poor man's" dispenser. You need following parts: -Tuberculin syringe (PZN: 09108383) -Plastic tipp 22 Gauge (https://a.aliexpress.com/_vqYZIi) -M3x30mm screw -M3 Nut & knurled Nut -M3 x 4mm Braas insert (https://a.aliexpress.com/_vcLeca) For refill the syringe i use a cheap hose from tool store (4mm Inside / 6mm Outside). A small piece from this tube with one side closed with hot glue can be used for seal the syringe for storing ;-)
Statistics
Likes
0
Downloads
0