Dayton BST-1 Mounts for Profile
Description
These are mounts for the Dayton BST-1 shakers. One is for mid mounting against a profile, the other is for cantilevering out (spacing is for direct mounting to the side of a Bride recliner, but can also be used for awkward spots on profile). M8 screws are countersunk, and there is also an offset for the M3 screws (you need a nut or nylock for the M3's) You can use a lower amount of infill 30% ish but use at least 8 perimeters/walls or more to ensure there is a good amount of strength around the fastening points.
Statistics
Likes
0
Downloads
0