Honeywell North Respirator Welding Adapter
Description
Do you have a Honeywell North respirator but have tried to wear it under a welding mask and you can no longer look out the welding filter without destroying your neck? Did you then look up the welding mask adapter and find that it costs like 100$? Well, here is a much worse version you can have for a significant time cost (to me, I have paid the time cost. You can just print it. There are also demo pieces you can print to make sure the threads and barbs fit before committing to a long print). Not a replacement for the real welding adapter use at your own risk. Only tested with a Honeywell North 7700-30M half mask respirator and 755CL organic vapor filters. Tubing is 2 pieces of 12" long, nominal 3/4" ID, 1" OD clear PVC tubing. Sorry, all pieces require supports and may need a small slice off the bottom to adhere. Rotate the filter holder by 22.5 degrees to get the big flat section to be one continuous bridge. Updated: I added a version with a basic clasp in the middle since I wanted a tighter fit using 8" tubes. But with 8" tubes you can't just put your head through the loop so I added the clasp.
Statistics
Likes
2
Downloads
0