Z Headz. Ender 3v2 Z axis manual control knob with removable Marvin (from original Hitchhikers Guide'))
Description
Z axis control knob and removable (optional in fact) Marvin head, the character from the original TV series Hitchhikers guide to the galaxy. Video of it moving is here :- https://youtu.be/OtAGEmfqHi4 As with my other toppers. Same rules apply. THINGIVERSE KEEPS RETURNING A 404 FILE NOT FOUND on the regular download button. If that happens to you, click on the 'thing files' option instead and download from there. https://youtu.be/NuY4At-ktPM Update :- I have redesigned the knob to be both stronger, have slightly more clearance up top and also lock far better than any of my previous versions. Instead of having to add the knob files to each of my topper designs uploads I have moved them to a separate fileset. It makes things a lot easier for me as I update the outstanding amendments. Actual Z axis screw on components are here https://www.thingiverse.com/thing:5147667 Ignore the nick in the side of his head, I fixed that immediately after seeing it. Also on this print, I damaged the piece around his mouth removing supports. Be careful there. It doesn't detract that much from it to be fair but I would have been happier if the supports hadn't pulled a bit away when removed.. Print Marvin with supports. Note. If you use a knob on your extruder (I do not) then it may potentially foul on the Z knob if you are doing a maximum height print. Check to be safe. Equally, it could also foul the filament/spool if you have it mounted over to the left up top. I use a side feed, so I cannot test that aspect.
Statistics
Likes
15
Downloads
0