Webasto AT2000S Parking heater intake cover
Description
This is a simple air intake grille/cover for a Webasto Air Top AT2000S diesel/petrol fired parking/aux heater as fitted to many Campervans/RVs/Trucks/boats etc. to stop fingers and other larger objects from catching in the fan blades of the cold air intake (can be used instead of Webasto genuine part 67492A - 1320163A). There is an interrupted thread type fitting on the cold air inlet boss that this slips over, then with a 90 degree twist, it secures onto the inlet boss. This does fit the hot air outlet at the other end of the heater, but due to the thermal limitations of 3D printed materials, I wouldn't recommend using it on the hot outlet. Should also fit a Webasto AT2000ST/STC, Eberspacher D1LC, D1LCC, Airtronic D2 and maybe even Webasto Thermo Top, and Chinese diesel heaters, but not tested it on these (let me know if it works on other models). Some later models may have a larger intake though (>60mm).
Statistics
Likes
0
Downloads
0