7530 FAN SHROUD FOR HEVORT WITH HEMERA AND VOLCANO
Description
This is a fan shroud to mount a 7530 blower fan to the Hevort carriage for Hemera/e3d volcano. Use the 2 left (x-) mounting holes for the X carriage to mount the shroud. Use the support to brace the blower off the top of the carriage. Use significantly less cooling with small nozzles (0.4 and 0.6mm) 100% (5015 blower) reduce to 25-30%. I haven't tried on larger nozzles yet. Check Y axis travel for clearance to the rear cross beam; I had to reduce the Y axis limit due to contact.
Statistics
Likes
2
Downloads
0