Electrical outlet insets for the Ikea Fryele flashlight or other appliances
Description
This set of electrical outlet insets works great for Ikea Fryele flashlight type E1762 but also any other appliances with simple flat plug which carries a lot of weight. Many appliances and power supplies are produced cheap and their design does not work great with their weight. Even without additional help pins of those not full plugs very often bend and connection degrades. Any other additional factor like heavy usage or kids playing around “help” even more in the process. This inset protects pins from bending and provide more rigidity to the plug and the appliances itself. No need for printing with a support, you can print whatever infill you want. Presented prints were done using: 0.2mm height, 0.6 nozzle with 0.5mm wall width, 2 perimeters and 3 layers on both top and bottom. Half inset: For the discreet usage, provide good stability and uses less material than full inset. Full big inset: Has a 0.1mm bigger clearance from all sides to not create big friction, used in heavy duty situations. Full small inset: Provides less rigidity but requires little plastic to print. Should be used around 3-4mm from the outlet (depends on the outlet, please check maximum place where the inset will still have some plastic of the outlet to lie on)
Statistics
Likes
0
Downloads
0