18650 water resistant container
Description
18650 double sealed carrying containter. Fits 1 piece of <u>non-protected 18650 cell with flat head</u>. It has place for one o-ring gasket inside screw-on lid and another one can be placed on container thread. This containter has M26x2 thread, so you need to turn the cap about 8 times to secure battery properly. It has built in lanyard holes in the lid and 4 rectangles on lid and containter for better grip, when wearing for example tactical gloves and to prevent rolling and falling from e.g. table. After placing an o-ring onto container thread, battery will most likely rattle inside container. If that bothers you - please use only one o-ring inside lid. Altough, from my experience, this containter will protect your battery from rain, mud, submerge in shallow water, <b>I am not responsible for any damage resulting from the use of this project and printed model. Remember - Li-ion cells are highly flammable when short circuit!</b> BOM: - 1 or 2 pcs of o-ring gasket 20-22 mm x 2 mm (outer diameter x thickness) - Some silicon oil or other mild grease to grease threads and o-rings (for a better seal against water) If you like my work, please consider sending me a tip. Thank you: https://www.paypal.com/paypalme/toasttoriginal
Statistics
Likes
1
Downloads
0