Raspberry Pi 4 SnapFit Case UK Socket Geekworm X857 SSD Board
Description
This is a Raspberry Pi 4 case that has been enlarged to accommodate a Geekworm / Suptronics SSD adapter board (it should work with the other RPi4 Geekworm SSD adapters). It is also a Pi case mount that can be attached to a UK power socket to keep it tidy and out of the way, rather than having it on the floor. It is my main Zigbee2mqtt coordinator that acts as a hub for 80+ Zigbee devices that in turn connects to my Home Assistant automation software. As an added bonus, I designed an antenna extender to help reduce interference from the Pi and SSD electronics, secured with small zip-ties. I designed it to mount above the socket because sometimes they can be quite close to the floor, plus I wanted my zigbee2mqtt module be as high as possible to help with the Zigbee range. The Top cover snaps into place so no screws are required. Zigbee2mqtt - https://www.zigbee2mqtt.io Home Assistant - https://www.home-assistant.io X857 V2.0 mSATA SSD Storage Expansion Board - https://www.aliexpress.com/item/4000051492209.html All printed using PLA with 0.2mm layer height. I have included the model STEP files so that you can easily modify the model for your own needs.
Statistics
Likes
0
Downloads
0