Olympus OM mount to Sony E mount adapter
Description
Edit: previously I didn't know how the aperture worked. It looks like I need to add another bit to the adapter to make it so the aperture can be adjusted. I'll edit this again when I've updated it. Olympus OM mount to Sony E mount adapter. The other adapter that was already on here didn't look like it was going to fit, so I measured my camera and lens as best I could and made this. I printed it with 0.3mm layer height because that seemed to work better for the overhangs without using supports. If you are going to use supports and or a different layer height, you might have to adjust the clearances, I've included the Fusion 360 file so you can do this. I also had to scale it in PrusaSlicer to 100.5% in x and y axes (not the z). If you use this, be careful with it, I'm not sure how strong the tabs are.
Statistics
Likes
2
Downloads
0