SK-Go Volcano Hemera Fan Duct + Pinda mount
Description
This fan duct can be used with the mounts created by Paul for SKGo. They are located here https://github.com/TheBasicMind/3DPrintParts/tree/master/Hermera%20Mount Note: These mounts were designed for 3mm aluminum, but I had to cut them using 1/8" (3.175mm) so the fan mount is design for 3.175mm Make sure to look at the photos for the way mounts are installed as the duct will only fit one specific mount configuration. You can also mount a Pinda to the left of the nozzle (offsets are X:-25, Y:0)
Statistics
Likes
1
Downloads
0