Halo 2 Anniversary Arbiter Controller Holder v1.1
Description
Halo 2 Anniversary Arbiter Controller Holder v1.1 ====================================================================== Base Model by limeisacrime (https://www.thingiverse.com/thing:2734045) Controller Holder Modification By Mike Suopys Licensed under the Creative Commons ====================================================================== To whom it may concern, Thank you for downloading the Halo 2 Anniversary Arbiter Controller Holder. Tested to fit the XBOX One controller. You may choose to 3D print the complete model in one piece by printing "ArbiterControllerHolder.stl". Or you may choose to print each half in case your printer is not large enough, then glue the halves together. Use the recommended 3D printer settings listed below in the summery. After printing, carefusly use sand paper and a hobby knife to trim away the unwanted suport material. Then proceed to painting the model. Use the recommended paint types below. Sincerely, - Mike Suopys **Summery*** Print files: ArbiterControllerHolder.stl Optional print files: ArbiterBottom.stl ArbiterTop.stl Recommended 3D Printer Settings: - Material: PLA - Layer Height: 0.15mm - Support Material Option: With support Material Other 3D printer options will depend on your type of printer. You'll have to try different settings. Recommended Paints as found on the internet: - Enamel model paint - Acrylic model paint Found at most hobby stores.
Statistics
Likes
9
Downloads
0