Base to accept 1/2 inch Loc-Line Fixed Mount (51895/59896)

Base to accept 1/2 inch Loc-Line Fixed Mount (51895/59896)

Description

This base accepts a [1/2 inch Loc-Line Fixed Mount (51895 / 59896)](https://www.loc-line.com/product/51895-12-fixed-mount-pack-of-2/), which is secured with a 1/4"-20 screw that passes through the mount. Anti-twist fins engage with the bottom of the fixed mount to prevent it from spinning on the printed base. Two versions are included, one for printing with the mount pointing upwards, and one for printing with the mount pointing horizontally. The horizontal printing version cuts the fins at a 45 degree upwards angle so that they can be printed with no supports. The photos above show how I integrated this mount design into my Loc-Line arm mount for camera tripod sockets, which you can find here: https://www.thingiverse.com/thing:4652788 I've included the Fusion 360 design files, STEP and STL files so you can easily integrate this mount into your own designs. Prints nicely in PLA.

Statistics

Likes

0

Downloads

0

Category

Camera