Zalman X3 Clip
Description
One of the clips for the side-walls of my Zalman X3 PC Case broke, so the side wall was not fully clipping into the case anymore. I recommend printing with a smaller nozzle, as 0.4 mm will not print the pins on the side small enough. I used a 0.2 mm Nozzle with a 0.1 mm layer height. As it's such a small part it still prints very quickly. Hope this helps someone. You need to push the clip all the way into the slot in the PC case, it needs to be flush with the case.
Statistics
Likes
1
Downloads
0