Raspberry Pi Case, NAS with Minirack, SSD openmediavault
Description
I had to make that thing again, there was a dead link to the files. This is the second Version of my Raspberry Pi 4 NAS, but now I installed some SSD's and I added more vents in the case. There are 3 different plates, one for the Raspberry Pi, you screw the Pi it down, one for SSD or 2.5" harddisks. (made for Kingston A400 SSD 2.5") and an empty plate, if you run a standard usb harddisk. You need: 8x spacer 15mm between the SSD's 4x spacer 25mm between the the Raspberry Pi bottom and top 4x spacer 20mm inside the Raspberry Pi 4x M3x15 lenshead screws for the rack stands 4x M3x 15mm for the bottom of the Raspberry Case 4x M3 covernut You can remove the GPIO cover and the cover to get access to USB and Ethernet. If your interested, I run the https://www.openmediavault.org/ on the Pi. For some reasons, this case and other stl files are not downloadable, you can download the servercase here: https://cults3d.com/en/3d-model/various/thing-ico-raspberry-pi-case-for-nas-with-minirack-ssd-openmediavault
Statistics
Likes
63
Downloads
0