Step Down Case - CSDCV2
Description
Hello, I would like to share with you this voltage step down case I made as my first ever thing! First of all I need to give credit to HonorNecris and gknapp, because as one of my first upgrades I printed these printer feet https://www.thingiverse.com/thing:4216554, based on this clip https://www.thingiverse.com/thing:4850441 and i fell in love with the abilty to easily attach anything onto the printer rails, so I used the same clip, but I still don't think it is a remix. If you know better, let me know please. So back to the case. It is very simple and functional design, but I'm still proud of it. I use it to convert 24V from the power supply to 5V USB output for my LED lights. The step down itself is 60×20×17mm big and is able to convert up to 40V to 5V/2A USB. You just print the clip by HonorNecris thing number 4216554, snap it into the CSDCV2_bottom, then you use two M3x5 screwes to secure the step down in the bottom part of the case, you connect your cables and usb, snap the top part on, whitch fits pretty securely and then you just clip the whole thing onto the rail and do your cable management right? xD For me works perfectly. Just lay both parts down in your slicer of choice befor printing. I connected it to a switch i placed next to the main power swich, so that when i turn on my printer, I just turn my lights on with the switch and they don't shine the whole time. I'm new to this so I was really happy, when I saw it working beautifly. That's all from me, I wish you happy printing and I hope this could be helpful to someone.
Statistics
Likes
0
Downloads
0