12MM Wheel Hex RC Hub
Description
The only difference between the 6mm and the 7mm is the height of the nut, I printed out the 6mm for my needs using a 0.4mm nozzle with 3 walls & 100% infill without supports. All of these models can be printed in any orientation, to print without the top spacers, flip the model on it's head and lower the Z value to 0.75mm! If you like the model, consider a like, follow, check out my other pages (link in bio) and maybe buying me a coffee/tea! Thanks! Note: I wouldn't recommend PLA for this application but I have only printed these in PETG
Statistics
Likes
0
Downloads
0