Arduino Bargraph Box
Description
I designed this box for my double bargraph with Arduino. This article was published in the magazine Mechatronica Jovem nr 2 and you can read the article by downloading the magazine through the link: https://www.newtoncbraga.com.br/index.php/mini-projetos/2-uncategorised/18572-mecatronica-jovem.html I printed my box using PETG, but it can be printed using ABS or PLA, no problem. It was not necessary to use brackets for the "openings" in my case. As a "lid" I suggest a 2mm thick piece of translucent acrylic that can be smoked, red or green. Depending on the color of the LEDs. (Portuguese) Desenhei essa caixa para meu bargraph duplo com Arduino. Esse artigo foi publicado na revista Mecatrônica Jovem nr 2 e você poderá ler o artigo fazendo o download da revista através do link: https://www.newtoncbraga.com.br/index.php/mini-projetos/2-uncategorised/18572-mecatronica-jovem.html Eu imprimi minha caixa usando PETG, mas a mesma pode ser impressa usando ABS ou ainda PLA, sem maiores problemas. Não foi necessário usar suportes para as "aberturas" no meu caso. Como "tampa" eu sugiro um pedaço de acrílico translucido de 2mm de espessura que pode ser fume, vermelho ou verde. Dependendo da cor dos LEDs.
Statistics
Likes
1
Downloads
0