Parametric Pipe Clamp - Rohrschelle - Quickschelle - Interlocks
Description
I needed some clamps for an unusual PVC pipe I had laying around. So I made this design inspired by our local generic hardware store clamps. It's parametric and can be customized in Fusion 360. The minimum pipe diameter is 16mm. __There are two models available:__ + Pipe Clamp Interlocks Parametric.f3d Pipe clamp with interlocks so you can save on screws when mounting multipe pipes (with varing diameter) next to each other. + Pipe Clamp Parametric.f3d Pipe clamp without interlocks for a clean one pipe look. __Parameters are:__ + Pipe diameter: The diameter of the pipe you want to clamp + Wall thickness: The thickness of the clamp arms. I found that 1.5mm worked great for PLA + Tolerance: The tolerance between interlocks (lower number means tighter fit) I found that 0.07mm provided just enough so it won't slide out on its own and fit snuggly. __To change the parameters:__ 1. Load the .f3d file in Fusion 360 2. Go to Edit → Parameters 3. Set Parameters to your specification 4. Export as .stl 5. Print :=)
Statistics
Likes
3
Downloads
0