Ski Rack - Ski Organizer
Description
This is a series of designs is a wall mounted rack to hold and organize skis and snowboard without applying load onto the tips and tails. This system uses standard Number 8 Screws (4.8mm major diameter) in order to be secured onto the flat surface that you would like to store your snow floatation device on. This design has four different configurations: * 122mm wide version, which works with most modern all mountain skis. * 122mm wide infinite length version, to allow a continuous run of mounts. * 280mm wide version designed for snowboards * 101mm wide version, which works on most kids and smaller width shaped skis. I have also included the SolidWorks file that has all four configurations if further adjustment is desired by the end user. *** ##Revisions: + **Revision 01** - Initial Release of 122mm wide ski version - + **Revision 02** - Added files for: Snowboard, infinite length, and kids skis. Updated part overview - 11/27/21 *** ##Print Settings: * Each STL has saved can be separated in slicers into individual parts using the "split into parts" function found in most slicers. * Material - PETG, ABS, or PLA + Perimeters - 3 (with 0.4mm Nozzle) + Supports - Not needed + Infill Percentage - 20% + Layer Resolution - 0.2mm *** ##Additional Details: + Parts can be glued together for additional securement, but is not needed for most wall mounts.
Statistics
Likes
2
Downloads
0