Motorized Phone Stand
Description
This stand is for an art project and just rotates a phone back and fourth slowly. It needs a some m8 bolt with washers and nuts to secure the arduino and first stage gear. Everything else is printed and requires a small amount of oil to get everything moving smooth. This was made for my pixel 5a but is a lose fit so I imagine other phones will work too. The stand uses these servos: https://www.amazon.com/Micro-Servos-Helicopter-Airplane-Controls/dp/B07MLR1498/ref=sxin_15_ac_d_rm?ac_md=0-0-c2Vydm8gbW90b3Jz-ac_d_rm_rm_rm&cv_ct_cx=servo%2Bmotors&keywords=servo%2Bmotors&pd_rd_i=B07MLR1498&pd_rd_r=a00b5925-562f-4eda-ba1b-20212b0dc814&pd_rd_w=RVdhp&pd_rd_wg=Em09j&pf_rd_p=c41d1f6c-956c-4fe2-8019-1663b7e1dd23&pf_rd_r=N97GTCKVJ3QY09ZK7F6C&qid=1636641627&sr=1-1-12d4272d-8adb-4121-8624-135149aa9081&th=1 Arduino for driving servos: https://www.amazon.com/Hobbypower-Atmega328p-Atmega16u2-Development-Compatible/dp/B00HY7O6QG/ref=sr_1_25?keywords=arduino+uno&qid=1636641732&s=toys-and-games&sr=1-25
Statistics
Likes
3
Downloads
0